A printed reference is useful only if its size is predictable. If a head that should be 5 cm across prints at 4.6 cm, every measurement you take from the print is wrong. The fix is to control the print width explicitly and to refuse the printer’s helpful rescaling.

Screen calibration and print size are different things

Calibrating the studio makes the on-screen rulers physically accurate for your display. Printing is a separate pipeline: the browser lays out the page in CSS pixels at 96 pixels per inch, and the printer maps those to paper. That is why the print sheet uses a target width in centimetres rather than inheriting the screen calibration.

You can print accurately without calibrating the screen at all, as long as you set the print width and choose 100% in the dialog.

Set the target width

Open Print & scale, enter the physical width you want, and press Print reference. The sheet places the image at exactly that width in CSS pixels. In the browser dialog, open “More settings” and choose Actual size / 100%. Turn off “Fit to page” and any “Scale to fit” option; those are the settings that quietly break the measurement.

Papers have a printable area smaller than their nominal size. If the requested width is wider than the printable area, the browser will clip or shrink it. Choose a width that fits inside the margins.

Match the paper to the drawing

Use the paper calculator to see how the reference fits on A4, A3, A5, Letter or a custom sheet. “Fit inside” preserves the whole image; “Fill page” crops to the paper. The scale percentage tells you how much the image is being enlarged or reduced, and the printed size tells you what you will actually get.

Do a five-second test print

Print once on plain paper and measure the width with a ruler. If it is off by more than a millimetre or two, check the dialog again: browser scaling, printer scaling, and “borderless” settings are the usual culprits. Once the test print is right, keep those settings for the session.

The print sheet also includes the measurement table and the grid, so one page can carry both the reference and the notes you need at the drawing board.

Put it into practice

Open Print & scale