The grid method is still the most reliable way to copy a complex reference. It breaks a daunting whole into small, checkable squares. The method is simple; the mistakes are almost always in the setup, not the drawing.

Choose a grid size that matches the drawing

A grid should create cells small enough to make each shape easy to place, but large enough that you can see the subject inside them. For a portrait on A4, 4 × 4 or 5 × 5 is usually enough; for a dense still life, 8 × 8 may help. Avoid very fine grids: they encourage copying lines instead of seeing forms.

Use the same number of rows and columns on the reference and on the paper, even if the paper is a different size. The cells will be rectangular on one of them if the aspect ratios differ; that is a warning that the drawing will be stretched. Crop or adjust the paper instead of accepting the distortion.

Set up the reference grid

In the studio, enable the grid and choose Custom. Set columns and rows to the numbers you want. The overlay follows the active reference, so it rotates and flips with the image. Use the “cell size” readout to see how large each cell is in your chosen unit; that is the size you will draw on paper.

If you are printing the reference, set a print width first. The print sheet includes the same grid, so the printed cells and the on-screen cells describe the same divisions.

Draw the matching grid on paper

Measure the paper’s drawable area, divide it by the number of columns and rows, and draw light lines with a hard pencil. Number the columns along the top and the rows down the side. On the reference, do the same. The numbers are not decoration: they are how you keep your place when a cell contains three edges and a shadow.

Transfer landmark by landmark

Work one cell at a time, but look at neighbouring cells constantly. Place the points where a line crosses a grid line first; those intersections are the most reliable anchors. Then join them. Do not shade until the whole drawing is placed — shading early makes it much harder to see a misplaced line.

  • Mark intersections before outlines.
  • Check the diagonal of each cell now and then; it catches drift.
  • Keep the grid lines light enough to erase.
  • Step back every few cells — the grid can make you myopic.

Remove the grid, keep the checks

When the drawing is placed, erase the grid gently and compare the whole image with the reference at the same size. The grid got you close; the mirror check and a few angle measurements will catch what it missed.

A grid is a scaffold, not a style. If the drawing looks stiff, the problem is usually that you copied cell contents instead of seeing the forms that cross the cells.

Put it into practice

Try the grid overlay