Your brain is very good at seeing what it expects. After an hour on a drawing, it stops reporting that the left eye is a little too high or that the jaw tilts the wrong way. Flipping the image is the cheapest way to break that spell.

Why flipping works

Faces and familiar objects are processed asymmetrically. A mirrored image no longer matches your stored expectation, so the visual system has to look at the shapes again. Errors in tilt, spacing and relative size become obvious — often embarrassingly obvious.

The same effect works on the reference. If the reference is flipped and the drawing is not, the mismatch is easier to see than when both are in their familiar orientation.

Flip the reference, then the drawing

In the studio, select the active reference and press Flip H. Compare it with your drawing. Then flip the drawing (photograph it or use the work-in-progress overlay) so both are mirrored. Look for the first three things that jump out; those are the ones to fix.

  • Are the eyes level with each other?
  • Does the nose sit on the centre line of the face?
  • Is the shoulder line the same angle on both sides?
  • Does the negative shape under the chin match?

Use the WIP overlay

Photograph your drawing flat, add it as the WIP overlay, and lower the opacity to about 40%. Align one landmark — the top of the head, a pupil, the corner of the mouth — then scale until a second landmark agrees. Now look at the third: the disagreement is your error, not the overlay’s.

Do not try to align everything at once. Two points define the scale and position; the rest is the information you are trying to read.

The mirror check is a diagnostic, not a crutch. Use it at the end of a session, fix the three biggest errors, then put the overlay away and draw.

Put it into practice

Compare a work in progress